Sales Tel. +34 938 93 53 02


Polyurethane Foam, Coatings and Polyureas

Designed with the customer in mind

Polyurea & Elastomers Proportioning Machinery

Easy Spray Pneumatic | Air Driven Proportioning Unit

Technical specifications
Max. Output: 4 kg/min
Max. Pressure Standard LP:
Max. Pressure Alternative HP:
100 bar
200 bar
Electrical Connections: 1 NPE 230 V 50/60 Hz
2 PE 230 V 50/60 Hz
Heating Power: 3,6 kW
Optional Heating Hoses: 1,6 kW
Machine Consumption: 16 A
Transformer Consumption: 9 A
Air Consumption LP:
Air Consumption HP:
(6 bar) 550 l/min | 5,5 HP
(6 bar) 750 l/min | 7,5 HP
(recommended air compressor)
Max. Hoses Length: 11 m (recirculation hoses)
48 m (hose transformer)
Max. Tank Capacity: 30 l + 30 l
Weight: 112 kg
Dimensions: 1000 mm x 610 mm x 700 mm
Documentation Parts Identification
Service Manual

Features and characteristics

Easy Spray Pneumatic, of an advanced and compact design, is an easy to use, portable air driven unit. Its unique configuration, the product tanks are placed on a chassis with wheels, provides easy access to all types of working areas as well as an outstanding mobility. The electrical console has only one control switch that allows an easy operation with no need of qualified personnel, and a saving of time during the set up and application.

Primary heating system

The primary heating system consists of two separate independent block heaters with no seals. Each heater incorporates 2 each 900 W heating elements that supply a total power of 1800 W with the necessary control and safety features for the accurate and reliable performance of the system. The special design of the heaters allows for a DT of 30º C and enables it to reach application temperatures of 70º C in normal environmental conditions.

Proportioning pumps

The system is including two positive displacement piston pumps, driven by a pneumatic motor. The proportioning pumps are manufactured from high hardness tempered aluminium and a special treatment that offers a low coefficient of friction, a high level of lubrication, and an increased level of wear resistance. The system includes a common guide system that ensures dynamic stability guaranteeing the correct alignment of the pump group and extending the life of the packing seals.

Recirculation system

Recirculation of the two components allows a faster achievement of the preset temperatures at the heaters before  starting to spray and during temporary shutdowns.

Hose heating system (optional)

The hose heating system is designed with 2000W transformer that allows the heating of up to 48m. of hose. The system incorporates an innovative concept of heated hose in which the copper resistance is homogenously spread around the hose. This allows accurate and uniform control of the application temperature of the products.

GAMA is member of

GAMA spray equipment

GAMA spray equipment